A Long-standing Supplier to Audi

Hankook Tire as original equipment on Audi's Q8 model series

Premium tire maker Hankook Tire and Technology Co. announced on Sept. 18 that it equips the new Audi Q8 with its tires ex works.

Progressive design and pioneering technology characterize the Q family of the Ingolstadt-based car manufacturer. The Audi Q8 with its single frame radiator grille in octagonal design is based on the successful Audi Ur-Quattro. The new SUV Coupe, which offers plenty of space, is luxurious and highly networked. High-tech navigation system, voice control, an agile chassis with Hankook tires in dimensions from 20 to 22 inches and powerful engines make the Q8 a dynamic vehicle that is particularly suitable for everyday use.

Three Hankook tire lines are used for the four-door SUV Coupe: the ultra-high performance summer and winter treads Ventus S1 evo 3 SUV and Winter i*cept evo 2 SUV respectively in 285/45 R21 113 Y XL and V XL and the Dynapro HP 2 Plus in the sizes 275/50 R20 113H X, 285/45 R21 113H XL and 285/40 R22 110H XL. Further dimensions will follow.

"We are very pleased that our products have again been selected for a new Audi model," explains Cho Hyun-jun, head of the OE Division. "Even as a long-standing supplier to Audi, it is an honor to have been named original equipment supplier for the top-model of the Q-Series. In addition, we are proud that we will supply the full range of our treads for the Q8 to various markets."

The Hankook tires provide particular support for agile handling when driving dynamically. "The central requirement in the course of the development was the tire design. Because of the generally higher vehicle loads with large SUVs and the resulting load index to be fulfilled in combination with the possible high speeds, the durability of the tire design was of course particularly important. In addition, we paid special attention to the required vehicle attributes in both wet and dry conditions," explains Hong Moon-hwa, vice president of the OE Development Department.

The Ventus S1 evo 3 is by the way constructed with ‘bead packing’, a special nylon material in the side wall area, which increases the side wall strength.

The two-layer carcass and the use of an aramid composite material reduce the unwanted growth of the unwinding circumference at high to very high speeds (over 300 kph) by up to 60 percent compared to previously used fabrics. This gives the tire significantly better driving stability and a longer service life due to less heat generation and thus remains at a consistently high level of grip even over a very wide temperature range. The sporty dynamic performance on both dry and wet roads is guaranteed by a special tread compound using high-performance natural resins.

Audi's Q8

 

Copyright © BusinessKorea. Prohibited from unauthorized reproduction and redistribution